Pet Feeders - Support

You can program each compartment to open in 2-hour intervals. Set each dial for when you want each compartment to open and allow your pet to eat a meal.

For example, if you feed your pet once a day and he just ate a meal, set the first dial to 24 and the second to 48. The first compartment will open 24 hours from now. If you feed your pet twice a day and he just ate a meal, set the dials to 12 and 24. The first compartment will open in 12 hours.

Setting the time

1. Press clock, then press set until the hours flash.
2. Press increase or decrease to set the hour.
3. Press set until the minutes flash.
4. Press increase or decrease to set the minutes.
5. Press clock to finish setting the time of day.

Setting the first daily feeding time

1. Press the clock, and then increase until the daily feeding time indicator displays.
2. Press set until the hours flash.
3. Press increase or decrease to set the feeding hour.
4. Press set until the minutes flash.
5. Press increase or decrease to set the feeding minute.
6. Press clock to finish setting the feeding time.

Set additional feeding times

1. Press clock, then press increase to display the next daily feeding time.
2. Repeat steps for setting the feeding time for each additional feeding.

Remove a programmed feeding time

1. Press clock, then press increase until the daily feeding time you wish to remove displays.
2. Press suspend feeding.
3. Press clock.

Suspend feeding (but keep programming)

Press and hold suspend feeding for 7 seconds, then release. The suspend feeding icon will appear in the upper right corner of the clock display. The “:” between the hours and minutes will flash once each second.

Resume feeding

Press clock, and the suspend feeding icon will disappear from the clock display.

Set Time & Day

1. Insert 2 AA batteries. Turn on the petPod. The LCD display will enter TIME SET mode. The SET indicator and the hour position will start flashing. The clock is a 12-hour clock with AM/PM indicator.
2. Set the time. To set the hour, press the + button. Press ENT when the hour is correct. To set the minutes, press the + button. Press ENT when the minutes are correct.
3. Set the day. The default is MON. Press the + button to alter the day. Press SET when it is correct. Pressing ENT again resets the time and date. When the time and day are correct press SET. The feeder will enter TIMER 1 set mode.

Set Timer 1

1. After setting the petPod’s time, you will enter TIMER 1 mode. SET, TIMER 1, and hour will start flashing. Now you can set the time when your pet will get fed.
2. Set the time. To set the hour, press the + button. Press ENT when the hour is correct. To set the minutes, press the + button. Press ENT when the minutes are correct. The timer will not set properly unless you set the minutes as well, so if you do not want to set the minutes you must leave it as 00 not --.
3. Set the day. The default is MON. Press the + button to alter the day. Press SET when it is correct. Pressing ENT again resets the time and date. When the time and day are correct press SET.
4. After SUN there is a DAILY indicator. When DAILY is set the timer (left hand lid) will activate at that same time every day. If you choose this option in TIMER 1, TIMER 2 is automatically set to daily also as default (you have the option to alter the time of opening). When TIMER 1 time and day is correct, press SET. The feeder will now enter TIMER 2 set mode. If you only want to set one feeding time, press SET again to enter run mode.

Set Timer 2

1. After setting the first feeding time, you will enter TIMER 2 mode. SET, TIMER 2, and hour will start flashing. Now you can set the second time when your pet will get fed.
2. Set the time. To set the hour, press the + button. Press ENT when the hour is correct. To set the minutes, press the + button. Press ENT when the minutes are correct. The timer will not set properly unless you set the minutes as well, so if you do not want to set the minutes you must leave it as 00 not --.
3. Set the day. The default is MON. Press the + button to alter the day. Press SET when it is correct. Pressing ENT again resets the time and date. When the time and day are correct press SET.
4. After SUN there is a DAILY indicator. If you chose DAILY for Timer 1, this is the only option for TIMER 2. Press the + button to change the day. When TIMER 2 time and day is correct, press SET. Setup is now complete. The feeder will now enter RUN mode.
5. If both TIMER 1 and TIMER 2 are set to the same time, and are both set as ACTIVE, then both left hand and right hand lids will activate at the same time and open the lids.

No, both the 2 meal and 5 meal feeders are recommended to be used with dry food only.

Our modern lifestyles have impacted our dogs and cats. Many pets show some signs of obesity. In order to prevent and control obesity, it is advisable to ration your pet's portions and provide him with some form of physical activity. Interactive feeding toys including Busy Buddy and SlimCat will do just that. They help your pet fight obesity and maintain a healthy weight by encouraging him to work for his food and by rationing his food.

• Ribs and backbone are not easy to feel
• Pet has no waist
• Significant fat has accumulated around all parts of the body
• When looking at pet from above, pet is very round